‘A’ Strike Template with Center Locator – Finish Size 1-Inch x 2-1/4-Inch Replaces Templaco ST-146A
$32.46
Big Horn 70132 ‘A’ Strike Template with Center Locator – Finish Size 1-Inch x 2-1/4-Inch Replaces Templaco ST-146A.Center Locator, 1-Inch x 2-1/4-Inch Replaces Templaco 1595A. Center locators will precisely locate the template over the hole bored into the door or jamb. Just insert the locator into the bored hole, place the template over the locator, set the nails to attach the template onto the door or jamb, remove the locator and rout the mortise with your router.
Big Horn 70132 ‘A’ Strike Template with Center Locator – Finish Size 1-Inch x 2-1/4-Inch Replaces Templaco ST-146A.Center Locator, 1-Inch x 2-1/4-Inch Replaces Templaco 1595A. Center locators will precisely locate the template over the hole bored into the door or jamb. Just insert the locator into the bored hole, place the template over the locator, set the nails to attach the template onto the door or jamb, remove the locator and rout the mortise with your router.
- Creates a finish mortise of 2-1/4” high x 1-3/4” wide or Full Lip (cuts clear through the edge of the door jamb) on the edge of the jamb for doors up to 1-3/4” thick
- Length of the template is 10” and it’s supplied with two nail attaching assemblies to attach to your door jamb. Adjustable for 1-3/8” and 1-3/4” door jambs
- Use a 1/2” cutter and a 5/8” OD template guide attached to your router to produce perfect mortises
- Comes with a Center Locator
| Weight | 10.88 oz |
|---|---|
| Dimensions | 10 × 4 × 2 in |
Reviews
There are no reviews yet.