Big Horn 70156 'A' Latch & Strike Template Kit. 1" x 2-1/4" latch template and 1" x 2-1/4" full lip strike template - Replaces Templaco LS-166A.Using your router this template kit will produce the finish mortise on both the door and the jamb. The strike template is for a ”full lip” style strike which is 2-1/4” tall and is mortised completely through the edge of the jamb so it creates a three sided mortise, actual width on the template is 1-7/8" wide. The door edge template finish size is 1” x 2-1/4”. Both templates are attached to the door and the jamb using the built in nail assemblies. Supplied with one Red Plastic Center Locator as shown to locate the templates onto the door and jamb in the proper position.
Big Horn 70132 'A' Strike Template with Center Locator - Finish Size 1-Inch x 2-1/4-Inch Replaces Templaco ST-146A.Center Locator, 1-Inch x 2-1/4-Inch Replaces Templaco 1595A. Center locators will precisely locate the template over the hole bored into the door or jamb. Just insert the locator into the bored hole, place the template over the locator, set the nails to attach the template onto the door or jamb, remove the locator and rout the mortise with your router.
Big Horn 70133 'B' Latch Template with Center Locator - Finish Size 1-1/8-Inch x 2-1/4-Inch Replaces Templaco LT-126B.Center Locator, 1-1/8-Inch x 2-1/4-Inch Replaces Templaco 1595-B/L. Center locators will precisely locate the template over the hole bored into the door or jamb. Just insert the locator into the bored hole, place the template over the locator, set the nails to attach the template onto the door or jamb, remove the locator and rout the mortise with your router.
