Drill Stops (inch and mm sizes)

$4.40 – $174.10

W.L. Fuller Inc. Drill Stops (inch and mm sizes)

Variants

Clear

SKU: 9514377229 GTIN: Array

Category: Other Accessories

Description

W.L. Fuller Inc. Drill Stops (inch and mm sizes)

These steel inch and mm drill stops are held solidly in place with two set screws, to give positive control on depth of drill cut. Legend below explains sizing. Select your item(s) then click Add to Cart.

Legend (in inches unless otherwise noted):

ID = Inside Diameter
OD = Outside Diameter
OL = Overall Length

Technical Info

W.L. Fuller Inc. is a family owned, third generation, manufacturer of the best countersinks, counterbores, plug cutters, taper point drills, brad-point drills, and step drills. They have over 60 years of experience in manufacturing tools to cut woods, plastics, and metals.

Additional information

Weight	N/A
Variants	ID 1/16 x OD 3/8 x OL 1/2, ID 5/64 x OD 3/8 x OL 1/2, ID 2.0mm x OD 3/8 x OL 1/2, ID 3/32 x OD 3/8 x OL 1/2, ID 7/64 x OD 3/8 x OL 1/2, ID 3.0mm x OD 3/8 x OL 1/2, ID 1/8 x OD 3/8 x OL 1/2, ID 9/64 x OD 7/16 x OL 1/2, ID 5/32 x OD 7/16 x OL 1/2, ID 4.0mm x OD 7/16 x OL 1/2, ID 11/64 x OD 7/16 x OL 1/2, ID 3/16 x OD 7/16 x OL 1/2, ID 5.0mm x OD 7/16 x OL 1/2, ID 13/64 x OD 1/2 x OL 1/2, ID 7/32 x OD 1/2 x OL 1/2, ID 15/64 x OD 1/2 x OL 1/2, ID 6.0mm x OD 1/2 x OL 1/2, ID 1/4 x OD 1/2 x OL 1/218, ID 17/64 x OD 5/8 x OL 5/8, ID 7.0mm x OD 5/8 x OL 5/8, ID 9/32 x OD 5/8 x OL 5/8, ID 19/64 x OD 5/8 x OL 5/8, ID 7.75mm x OD 5/8 x OL 5/8, ID 5/16 x OD 5/8 x OL 5/8, ID 8.0mm x OD 5/8 x OL 5/8, ID 8.1mm x OD 3/4 x OL 3/4, ID 21/64 x OD 3/4 x OL 3/4, ID 8.5mm x OD 3/4 x OL 3/4, ID 11/32 x OD 3/4 x OL 3/4, ID 9.0mm x OD 3/4 x OL 3/4, ID 23/64 x OD 3/4 x OL 3/4, ID 9.5mm x OD 3/4 x OL 3/4, ID 3/8 x OD 7/8 x OL 7/8, ID 9.8mm x OD 7/8 x OL 7/8, ID 25/64 x OD 7/8 x OL 7/8, ID 10.0mm x OD 7/8 x OL 7/8, ID 13/32 x OD 7/8 x OL 7/8, ID 27/64 x OD 7/8 x OL 7/8, ID 11.0mm x OD 7/8 x OL 7/8, ID 7/16 x OD 7/8 x OL 7/8, ID 29/64 x OD 7/8 x OL 7/8, ID 15/32 x OD 7/8 x OL 7/8, ID 12.0mm x OD 7/8 x OL 7/8, ID 31/64 x OD 7/8 x OL 7/8, ID 1/2 x OD 7/8 x OL 7/8, ID 13.0mm x OD 1 x OL 1, ID 33/64 x OD 1 x OL 1, ID 17/32 x OD 1 x OL 1, ID 9/16 x OD 1 x OL 1, ID 37/64 x OD 1 x OL 1, ID 15.0mm x OD 1 x OL 1, ID 19/32 x OD 1 x OL 1, ID 5/8 x OD 1-1/8 x OL 1-1/8, ID 21/32 x OD 1/1/8 x OL 1-1/8, ID 11/16 x OD 1-1/8 x OL 1-1/8, ID 45/64 x OD 1-1/8 x OL 1-1/8, ID 23/32 x OD 1-1/8 x OL 1-1/8, ID 47/64 x OD 1-1/8 x OL 1-1/8, ID 3/4 x OD 1-1/4 x OL 1-1/4, ID 20.0mm x OD 1-1/4 x OL 1-1/4, ID 51/64 x OD 1-1/4 x OL 1-1/4, ID 13/16 x OD 1-3/8 x OL 1-3/8, ID 7/8 x OD 1-3/8 x OL 1-3/8, ID 15/16 x OD 1-1/2 x OL 1-1/2, ID 31/32 x OD 1-1/2 x OL 1-1/2, ID 1 x OD 1-1/2 x OL 1-1/2, N 13 x 1/16 to 1/4 by 64ths, N 15 x 1/16 to 1/2 by 32nds, N 21 x 1/16 to 3/8 by 64ths, N 26 x A to Z Letter Sizes, N 29 x 1/16 to 1/2 by 64ths, N 50 x #1 to #50 Wire Gauge

Weight

N/A

Variants

ID 1/16 x OD 3/8 x OL 1/2, ID 5/64 x OD 3/8 x OL 1/2, ID 2.0mm x OD 3/8 x OL 1/2, ID 3/32 x OD 3/8 x OL 1/2, ID 7/64 x OD 3/8 x OL 1/2, ID 3.0mm x OD 3/8 x OL 1/2, ID 1/8 x OD 3/8 x OL 1/2, ID 9/64 x OD 7/16 x OL 1/2, ID 5/32 x OD 7/16 x OL 1/2, ID 4.0mm x OD 7/16 x OL 1/2, ID 11/64 x OD 7/16 x OL 1/2, ID 3/16 x OD 7/16 x OL 1/2, ID 5.0mm x OD 7/16 x OL 1/2, ID 13/64 x OD 1/2 x OL 1/2, ID 7/32 x OD 1/2 x OL 1/2, ID 15/64 x OD 1/2 x OL 1/2, ID 6.0mm x OD 1/2 x OL 1/2, ID 1/4 x OD 1/2 x OL 1/218, ID 17/64 x OD 5/8 x OL 5/8, ID 7.0mm x OD 5/8 x OL 5/8, ID 9/32 x OD 5/8 x OL 5/8, ID 19/64 x OD 5/8 x OL 5/8, ID 7.75mm x OD 5/8 x OL 5/8, ID 5/16 x OD 5/8 x OL 5/8, ID 8.0mm x OD 5/8 x OL 5/8, ID 8.1mm x OD 3/4 x OL 3/4, ID 21/64 x OD 3/4 x OL 3/4, ID 8.5mm x OD 3/4 x OL 3/4, ID 11/32 x OD 3/4 x OL 3/4, ID 9.0mm x OD 3/4 x OL 3/4, ID 23/64 x OD 3/4 x OL 3/4, ID 9.5mm x OD 3/4 x OL 3/4, ID 3/8 x OD 7/8 x OL 7/8, ID 9.8mm x OD 7/8 x OL 7/8, ID 25/64 x OD 7/8 x OL 7/8, ID 10.0mm x OD 7/8 x OL 7/8, ID 13/32 x OD 7/8 x OL 7/8, ID 27/64 x OD 7/8 x OL 7/8, ID 11.0mm x OD 7/8 x OL 7/8, ID 7/16 x OD 7/8 x OL 7/8, ID 29/64 x OD 7/8 x OL 7/8, ID 15/32 x OD 7/8 x OL 7/8, ID 12.0mm x OD 7/8 x OL 7/8, ID 31/64 x OD 7/8 x OL 7/8, ID 1/2 x OD 7/8 x OL 7/8, ID 13.0mm x OD 1 x OL 1, ID 33/64 x OD 1 x OL 1, ID 17/32 x OD 1 x OL 1, ID 9/16 x OD 1 x OL 1, ID 37/64 x OD 1 x OL 1, ID 15.0mm x OD 1 x OL 1, ID 19/32 x OD 1 x OL 1, ID 5/8 x OD 1-1/8 x OL 1-1/8, ID 21/32 x OD 1/1/8 x OL 1-1/8, ID 11/16 x OD 1-1/8 x OL 1-1/8, ID 45/64 x OD 1-1/8 x OL 1-1/8, ID 23/32 x OD 1-1/8 x OL 1-1/8, ID 47/64 x OD 1-1/8 x OL 1-1/8, ID 3/4 x OD 1-1/4 x OL 1-1/4, ID 20.0mm x OD 1-1/4 x OL 1-1/4, ID 51/64 x OD 1-1/4 x OL 1-1/4, ID 13/16 x OD 1-3/8 x OL 1-3/8, ID 7/8 x OD 1-3/8 x OL 1-3/8, ID 15/16 x OD 1-1/2 x OL 1-1/2, ID 31/32 x OD 1-1/2 x OL 1-1/2, ID 1 x OD 1-1/2 x OL 1-1/2, N 13 x 1/16 to 1/4 by 64ths, N 15 x 1/16 to 1/2 by 32nds, N 21 x 1/16 to 3/8 by 64ths, N 26 x A to Z Letter Sizes, N 29 x 1/16 to 1/2 by 64ths, N 50 x #1 to #50 Wire Gauge

Reviews (0)